OMRON XG4A-6034

OMRON XG4 Series Flat Cable Connectors

The OMRON XG4 series offers mainstream circuit board connectors conforming to MIL standards with improved design. These connectors are designed for high-density mounting and offer simplified patterning with a 2.54-mm pitch. They are suitable for various applications, including those requiring MIL-compliant cable for faster delivery times and lower costs compared to half-pitch board cables.

Key Features:

• Recommended for high-density mounting.
• MIL-compliant cable ensures faster delivery times and lower cost.
• 2.54-mm pitch simplifies patterning.
• Space-saving Box-type Plugs (XG4C) available.
• IDC Plugs (XG4E) can be used for relaying.
• Can be locked using Lock Levers (XG4C, XG8).
• Conform to MIL standards (MIL-C-83503).

Tools and Accessories (Sold Separately)

• XG4Z-0004 Polarizing Key: Prevents reverse insertion. Material: PBT resin (UL94 V-0/white). Each pack contains 4 keys.
• XG4Z-0005 Coding Pin: Prevents confusion when multiple connectors are lined up or reverse insertion. Material: PBT resin (UL94 V-0)/white. Each pack contains 4 pins. Note: A contact with a Coding Pin inserted cannot be used.
• XY2E-0002 Contact Cutting Driver: Used to cut (twist off) a contact on the mating Plug when using an XG4Z-0005 Coding Pin.
• XG5Z-0002 Lock Lever for XG8B and XG8W Plugs (With Right-angle Terminals): Locks Unshrouded Plugs. Material: Polyamide resin (UL94 V-2)/natural.
• XG4Z-0002 Lock Lever II for XG4C Plugs: Locks XG4C Box-type Plugs. Material: Polyamide resin (UL94 V-2)/natural.

Precautions

Correct Use

• Mounting: Be sure to anchor the board with screws before mounting. A Polarizing Key cannot be mounted on the lower Plug.
• Connecting the Socket: Remove as much slack from the cable as possible before connecting the XG4M with Strain Relief. Attach the Semi-cover before connecting the XG5M-N; Hood Cover cannot be used.
• Soldering: Automated Soldering Conditions (Jet Flow): Soldering temperature: 250 5C, Continuous soldering time: Within 51s. Solder-mount the XG4A with lock levers fully closed or open. Half-open lock levers may cause play due to thermal deformation.
• Lock Lever Operation: Do not force the lock lever past its movable range to avoid connector damage. Do not use tools; operate only by hand. Always release the lock mechanism before disconnecting the connector.
• Storage: If lock levers are left at an intermediate position for a long time, they may become loose due to plastic deterioration. Store with lock levers fully closed or fully open when not in use.