| 3-1-1 Contact Resistance | Mate connectors, reassure by dry circuit ,20mV MAX,10mv.(Based upon JIS C5402 5.4) | 0.02 (MAX) |
| 3-1-2 Insulation resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method 302 condition B) | 1000 M (MIN) |
| 3-1-3 Dielectric strength | Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301) | No breakdown and flashover |
| 3-2-1 Insertion force and withdrawal force | Insert and withdraw connectors at the speed rate of 25 3mm/minute | 1.5 Kgf (MIN) |
| 3-2-1 Insertion force | Insert the crimped terminal into the connectors | 2.5 Kgf (MAX) |
| 3-2-4 withdrawal force | Apply axial pull out force at the speed rate of 25 3mm/minute on the terminal assembled in the housing. | 1.0 Kgf (MIN) |
| 3-3-1 Repeated insertion/withdrawal | When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute | Contact Resistance 40m MAX |
| 3-3-2 Temperature Rise | Carrying rated current load(Based upon UL1977) | 30C MAX |
| 3-3-3 Vibration | Amplitude:1.52mm P.P Sweep time:10-55-10Hz in 1 minute Duration:2 hours in each X.Y.Z axls (based upon MIL-STD-202 method 201) | Appearance: No Damage, Contact Resistance 40m MAX, Discontinuity 1 sec MAX |
| 3-3-4 Shock | 50g 3strokes in each X.Y.Z. axls. (based upon JIS C0041) | Appearance: No Damage, Contact Resistance 40m MAX, Discontinuity 1 sec MAX |
| 3-3-5 Heat Resistance | 1053C, 96hours (based upon JIS C5402 7.8) | Appearance: No Damage, Contact Resistance 40m MAX |
| 3-3-6 Cold Resistance | -503C, 96hours (based upon JIS C5402 7.9) | Appearance: No Damage, Contact Resistance 40m MAX |
| 3-3-7 Humidity | Temperature:402C, Relative humidity:90~95% (RH) conditions.B) (Based upon MIL-STD-202 Method 103B) | Appearance: No Damage, Contact Resistance 40m MAX, Dielectric strength L |
| 3-3-8 Temperature cycling | 5 cycles: 1>-50C 30 minutes. 2>, +105C 30 minutes. 3>425C 30 minutes. 4>.+65C 30 minutes | Appearance: No Damage, Contact Resistance 40m MAX |
| 3-3-9 Salt spray | 12 hours exposure to a salt spray from the 51% solution at 352C. (Based upon JIS C5402/MIL-STD-202method 101D conditions. B) | Appearance: No Damage, Contact Resistance 40m MAX |
