Home > Lighting Connectors >

TE Connectivity 1-2314786-1

Product Categories

FFC FPC Connector [152]
Memory Connectors [144]
Power Connectors [629]
Heavy Duty Connectors [118]
Rectangular Connectors [122]
Terminal Connectors [124]
D Sub Connectors [100]
USB DVI HDMI Connectors [100]
Backplane Connector [100]
Lighting Connectors [100]
Centronics Connectors [197]
Coaxial Connectors [100]
Shunts, Jumpers [111]
Fiber Optic Connectors [100]
Photovoltaic Connectors [34]
Banana Bullet Connector [94]
Transistor Socket [100]
Sleeve Connector [101]
Pluggable Connector Accessories [113]
Arrays, Edge Type, Mezzanine (Board to Board) [324]
Between Series Adapters [26]
Rectangular Connector Adapters [21]
IC Sockets [86]
Barrel, Bullet Connectors [5]
Terminal Adapters [1]
USB, DVI, HDMI Connector Accessories [35]
D-Sub Connector [358]
Connector Adapter Kits [12]
Audio Connectors [204]
Contacts, Spring Loaded (Pogo Pins), and Pressure [18]
Plugs and Receptacles [79]
Power Entry Modules (PEM) [45]
Pluggable Connector Assemblies [93]
Barrier Blocks [73]
ARINC [3]
Terminal Strips and Turret Boards [1]
Backplane Connector Accessories [15]
Patchbay, Jack Panel Accessories [54]
Backshells and Cable Clamps [89]
Circular Connector Accessories [401]
Coaxial Connector (RF) Accessories [41]
Coaxial Connector (RF) Adapters [415]
Coaxial Connector (RF) Assemblies [965]
D-Sub, D-Shaped Connector Housings [64]
FFC, FPC (Flat Flexible) Connector Accessories [1]
FFC, FPC (Flat Flexible) Connector Assemblies [2373]
Heavy Duty Connector Accessories [98]
Heavy Duty Connector Assemblies [2]
Heavy Duty Connector Frames [13]
Heavy Duty Connector Housings, Hoods, Bases [125]
Heavy Duty Connector Inserts, Modules [3]
Inline Module Sockets [28]
Memory Connector Accessories [3]
PC Card Sockets [485]
Modular/Ethernet Connector Jacks With Magnetics [51]
Photovoltaic (Solar Panel) Connector Assemblies [68]
Solid State Lighting Connector Accessories [7]
Blade Type Power Connector Accessories [79]
Blade Type Power Connector Assemblies [110]
Multi Purpose [215]
Power Entry Connector Accessories [1]
USB, DVI, HDMI Connector Adapters [348]
Circular Connector Assemblies [972]
Heavy Duty Connector Contacts [135]
Circular Connector Adapters [95]
Board In, Direct Wire to Board [14]
Free Hanging, Panel Mount [550]
USB, DVI, HDMI Connector Assemblies [1172]
Backplane Connector Housings [30]
Blade Type Power Connector Housings [116]
Board Spacers, Stackers (Board to Board) [103]
Card Edge Connector Accessories [1]
Headers, Male Pins [2649]
Fiber Optic Connector Accessories [57]
Fiber Optic Connector Adapters [263]
FFC, FPC (Flat Flexible) Connector Housings [314]
Specialized Connectors [102]
Coaxial Connector (RF) Contacts [20]
Ring Connectors [280]
FFC, FPC (Flat Flexible) Connector Contacts [2]
Solid State Lighting Connector Assemblies [18]
Solid State Lighting Connector Contacts [2]
Lugs [18]
Spade Connectors [97]
Housings, Boots [16]
Knife Connectors [3]
D-Sub, D-Shaped Connector Accessories [14]
D-Sub, D-Shaped Connector Jackscrews [21]
Fiber Optic Connector Assemblies [245]
Keystone Connector Accessories [3]
Keystone Faceplates, Frames [6]
Keystone Inserts [116]
Modular/Ethernet Connector Adapters [54]
Modular/Ethernet Connector Jacks [415]
Modular/Ethernet Connector Plug Housings [18]
Modular/Ethernet Connector Wiring Blocks [3]
Din Rail, Channel [3]
Barrel Connector Adapters [1]
Terminal Block Accessories [4]
Rectangular Connector Contacts [333]
Rectangular Connector Housings [1354]
Specialized Terminal Blocks [30]
Terminal Block Adapters [2]
Rectangular Connector Accessories [170]
Hard Metric, Standard [102]
DIN 41612 [122]
Panel Mount [8]
Terminal Block Jumpers [1]
Blade Type Power Connector Contacts [53]
Magnetic Wire Connectors [14]
PC Pin Receptacles, Socket Connectors [37]
PC Pin, Single Post Connectors [16]
Spring Loaded [21]
Quick Connects, Quick Disconnect Connectors [129]
Wire Pin Connectors [15]
Screw Connectors [44]
Jacks, Plugs [10]
Headers, Plugs and Sockets [1891]
Power Distribution [45]
Terminal Block Wire Ferrules [41]
Wire to Board [452]
Coaxial Connector (RF) Terminators [61]
Headers, Specialty Pin [1]
Interface Modules [3]
D-Sub, D-Shaped Connector Adapters [5]
Banana and Tip Connector Adapters [136]
Wire Splice Connectors [73]
Headers, Receptacles, Female Sockets [1311]
Terminal Accessories [1]
Card Edge Connector Housings [1]
Edgeboard Connectors [92]
D-Sub, D-Shaped Connector Backshells, Hoods [290]
D-Sub, D-Shaped Connector Contacts [13]
Modular/Ethernet Connector Plugs [1]
Backplane Connector Contacts [7]
Circular Connector Contacts [77]
Circular Connector Housings [237]

Shenzhen ECER Network Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

TE Connectivity 1-2314786-1

Color : Black

Flame Retardant Rating : UL94V-0

Packaging Details : -

Description : Black -40℃~+85℃ Solid State Lighting Connector Assemblies RoHS

MOQ : 450

Stock : 45000

Delivery Time : 25-42周

Model Number : 1-2314786-1

Operating Temperature : -40℃~+85℃

Brand Name : 1-2314786-1

Contact Now

Product Overview

The TE Connectivity LUMAWISE Endurance N Enhanced Base is designed for energy metering applications, offering robust performance and versatile integration. This product supports various voltage inputs and frequencies, with options for different fail modes and communication protocols. It is built with durable materials and features surge protection for enhanced reliability.

Product Attributes

Brand: TE Connectivity
Product Line: LUMAWISE Endurance N
Material (Housing): PBT
Material (Dimming Contacts): Copper Alloy
Material (Line Voltage Contacts): Copper Alloy
Material (Gasket): Vinyl/Nitrile Foam
Material (O-Ring): Silicone Rubber
Material (PCBA): FR4
Certifications: RoHS (Directive 2002/95/EC)

Technical Specifications

Part Number	Fail Mode	Zero Cross	Energy Metering	Frequency	Line Voltage Contacts	Dimming Contacts	Absolute Maximum Ratings (Storage Temp)	Absolute Maximum Ratings (Line to Neutral Voltage)	Absolute Maximum Ratings (Max AC Current Resistive)	Electrical Characteristics (Input Voltage Range)	Electrical Characteristics (Input Frequency)	Electrical Characteristics (Max AC Current Resistive)	Electrical Characteristics (Max AC Current Electronic Ballast)	Electrical Characteristics (DC Power Supplies)	Electrical Characteristics (Communications)	Electrical Characteristics (Auxiliary)	Surge Protection	Power Consumption (Min Load @ 120 VAC)	Power Consumption (Min Load @ 277 VAC)	Environmental Characteristics (Operating Temperature)	Environmental Characteristics (Relative Humidity)	Environmental Characteristics (Altitude Operating)	Environmental Characteristics (Altitude Non-Operating)	Finish (Dimming Contacts)	Finish (Line Voltage Contacts)
2314786-1	ON	YES	YES	60Hz	3 PLC	1 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.
2314786-2	OFF	YES	YES	60Hz	4 PLC	2 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.
1-2314786-1	ON	YES	YES	50Hz	3 PLC	1 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.
1-2314786-2	OFF	YES	YES	50Hz	4 PLC	2 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.
3-2314786-1	ON	YES	YES	60Hz	3 PLC	1 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.
3-2314786-2	OFF	YES	YES	60Hz	4 PLC	2 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.
4-2314786-1	ON	YES	YES	50Hz	3 PLC	1 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.
4-2314786-2	OFF	YES	YES	50Hz	4 PLC	2 PLC	-40 to 105 C	90 to 300 VAC	8 AMPS	110/120, 230/240 AND 277 VAC NOMINAL SOURCES	47-63 Hz	8 AMPS	5 AMPS @120V	24 VDC AT 50 mA MAXIMUM	5 VDC AT 1000 mA MAXIMUM	3.3VDC AT 500 mA MAXIMUM	ANSI C62.41 6 kV, 3 kA COMBINATION WAVE	< 1W	< 2W	-40 C TO +85 C	15% TO 96%, NON-CONDENSING	-15m TO +2,000m	-15m TO +14,000m	Nickel Underplate Entire Contact 0.127 m MIN THICK. Selective Gold Plate Contact Mating Area (Mating Face Side Only) 0.76 m MIN THICK. Matte Tin Plate Tab on Both Sides 0.30 m MIN THICK.	Matte Tin Plate Mating Interface Per ANSI C136.41-2013.

TE Connectivity 1-2314786-1 Manufactures

TE Connectivity 1-2314786-1 Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen ECER Network Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!